• Skip to primary navigation
  • Skip to main content
  • Skip to footer

Red River Valley Amateur Radio Club

Amateur Radio in and around the Red River Valley Area of Northeast Texas

  • Home
  • About
    • Contact Us
    • Leadership
  • Membership
    • Member Login
    • The Benefits of Membership
    • Join Us/Renew
    • Profile
    • Member Directory
    • Logout
  • Forums
  • Sponsor
  • Search
  • Ham News
  • History
    • Honor Roll
    • Silent Key
    • Club History
    • Storm Chase 3/25/2019
    • February 2019 Meeting
    • Field Day
      • Field Day 2019
      • Field Day 2005
  • Education/Testing
    • Want to become a ham?
    • Testing – ARRL Volunteer Examiner Administered
    • Propagation
    • Current DX Spots
    • APRS® Messaging System
  • Library
    • Meeting Minutes
    • “Unofficial” Call Sign List
    • RRVARC Net Call Up Script
    • Manuals – Operating, Instruction, Literature, Spec Sheets, etc.
    • Band Plan Illustrations
    • Cross Band Repeater Operation – Charles Penry (WA5VHU) – Recommended Best Practices
    • How to obtain an official copy of your FCC license
    • Governing Documents – Approved
    • Club Reports and Recurring Obligations
    • Governance Project
    • RRVARC-WB5RDD INVENTORY LIST
  • Club Repeaters
  • Shop
  • Officers Only
    • Media Contacts
    • Treasurer’s Reports
    • Texas Required Filings
    • Membership Applications
    • Website Management
    • Website Updating – Tips – Tricks
    • Cellular Hot Spots
Home » Topics » General Q&A » Raising a mast?

Raising a mast?

  • This topic has 7 replies, 4 voices, and was last updated 2 years, 9 months ago by Wyndell Ferguson.
Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • January 12, 2023 at 11:38 am #37675
    Wyndell Ferguson
    Participant

    What is the best way to raise a pole/mast using a front end loader on a tractor?

    Pole is Army Tent Poles approx 35′ long.  I have guy wire attachments already attached, as well as the dipole antennae unit.  Id really like to raise it all at once instead of a few sections at a time.  Suggestion please!?

    January 13, 2023 at 12:29 pm #37676
    Charles Penry
    Participant

    Follow this procedure. You must use 4 sets of guy wires/ropes, 3 will not work.

    I use this same method to raise and lower my 40′ tower with a winch.

    Either have at least one person to help you or sit the mast on a somewhat tall ladder to start or the angle on the pull up ropes will be too great.

    http://www.ontariosurplus.com/pdf/ab155.pdf

    • This reply was modified 3 years ago by Charles Penry.
    January 14, 2023 at 7:15 am #37678
    Wyndell Ferguson
    Participant

    Thanks Charles Ill have to try that!

    January 25, 2023 at 5:38 pm #37684
    Kathy Beall
    Participant

    Did you get it up Wyndell? ????

    January 28, 2023 at 8:09 am #37691
    Wyndell Ferguson
    Participant

    I actually haven’t had a chance to work on it.  My wife just had knew replacement surgery and the weather went cold and wet.  I’m hoping to get my granddaughter and grandson in law to come over and try next weekend.

    January 28, 2023 at 6:05 pm #37692
    Kathy Beall
    Participant

    Well good luck with that and I hope your wife is doing well after the knee replacement surgery. ????????  Next week’s weather sounds pretty icky but hopefully the weekend will be nice.  Keep us updated.

    April 16, 2023 at 3:46 pm #38824
    Jim Clark
    Participant

    something to ponder

    April 17, 2023 at 8:12 am #38827
    Wyndell Ferguson
    Participant

    Great news, we were finally able to get it up and changed it to 40′.  Got 150′ of low loss, direct bury cable connected and in the ground.  Made a few POTA hunter contacts yesterday.  thanks all!

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.
Log In

Footer

Who We Are

Red River Valley Amateur Radio Club (RRVARC) is a licensed FCC radio operator (WB5RDD) and an affiliate of the American Radio Relay League (ARRL) – The National Association for Amateur Radio®.

Club members – hams – are persons interested in amateur radio operations and public service. The Club and its members participate in public service events such as the Tour de Paris, Field Day and educational activities, as well as during emergency preparedness activations.

Non-Profit Organization

The RRVARC is a 501(c)3 tax-exempt organization.

Where We Meet

The Red River Valley Amateur Radio Club meets at High Cotton Kitchen (1260 Clarksville Street, Paris, TX 75460) usually on the 4th Saturday of each month.  There is an optional breakfast gathering at 0830-0900 and the meeting starts at 1000.  The Club meeting is conducted in the rear conference room.

Note: Special events like Field Day and some November and December meetings are excepted.  Check the events calendar for special location, dates and time.

Website contents and logo Copyright Red River Valley Amateur Radio Club (RRVARC). Please email the webmaster (admin@rrvarc.org) with additional content or corrections.